If your doorbell is going off by itself but there’s no one there, you might want to get to the bottom of this. There could be a ghost! But no, it’s probably not a ghost.
It could be a number of things ranging from just needing a battery to something more serious like alkaline corrosion. In the blog post are tips on how to fix and answers to common questions that might interest you.
What Are The Possible Reasons Doorbell Goes Off By Itself?
There are different reasons your doorbell could be going off by itself. Below is a list of reasons you should consider if your doorbell keeps giving you a false alarm.
- Battery Issues
This is one thing you should consider if you are looking for reasons why your doorbell keeps going off by itself. If you are using a battery that isn’t too compatible with your doorbell, there is a pretty good chance it would give you a false alarm.
Apart from the compatibility of the battery, if you are using a bad battery, there is a pretty good chance it would affect your doorbell as well. Batteries wear out over time if they are being used without being changed.
Check your doorbell battery to ensure they are not bad or running low whenever you notice your doorbell going off by itself.
- Frequency
This is another thing that could be responsible for your doorbell going off by itself. If you are using a wireless doorbell, there is a pretty good chance the frequency is what is responsible for the constant false alarms your doorbell keeps giving you.
If other devices use the same frequency as your doorbell, there is a pretty good chance it will cause your doorbell to keep going off by itself.
Also, if other wireless doorbells operate at the same frequency as yours, there will be interference in the signal.
- Moisture or Lack of Cleaning
When it comes to a device like this, you need to pay a lot of attention to how to maintain it. If it is not properly maintained, your doorbell will begin to malfunction with time.
If you do not clean your doorbell often, it will lead to the accumulation of dust.
This dust in turn leads to the accumulation of moisture inside your doorbell.
When there is dust and moisture in your doorbell, it is just a matter of time before your doorbell keeps going off by itself.
- Improper Installation
This is another popular reason why your doorbell keeps going off by itself. If there is any fault in the installation, this could make your doorbell constantly go off by itself and give you a false alarm.
Improper installation could range from bad wiring to short circuits and a lot more.
If any of these mistakes were done when your doorbell was being installed, your doorbell will continue going off by itself. Check the installation process to ensure every wire is fixed in the right places.
- Aged Device
While this might not be a very popular reason, it is still very much possible if you are using an old doorbell.
If your doorbell is relatively new, you have no worries, however, if the doorbell you are using is relatively old, you should probably consider this point.
If your doorbell is old, there is a pretty good chance that it will keep going off by itself.
This is because the wires, buttons, and components inside the doorbell are already worn out. The wearing out is what is responsible for the constant false alarms.
How To Fix Doorbells Going Off By Itself (Step-by-step Guide)
Once you notice that your doorbell keeps ringing because of any of the causes listed above, you might require a solution. Below is a step-by-step guide on how to fix your doorbell for each of the causes listed above.
- Battery Issues
It is relatively easy to change the batteries in your doorbell once you notice that your doorbell is having a flat battery. All you need to do is follow the steps listed below.
- The first thing you have to do is to unscrew your doorbell. You can use either a screwdriver or a drill to unscrew the device from where it is fixed.
- Once you unscrew the device, you will need to look for the battery compartment and open it.
- Remove the old batteries in the battery compartment
- Put a new battery in the battery compartment and close the compartment
- Test the doorbell to know if it works, then place the doorbell back on the wall, door or gate.
- Frequency
Below are the steps you need to take to change the frequency of your wireless doorbell.
- The first thing you need to do is remove the battery
- After removing the battery, press the push button for 20 seconds.
- After a couple of minutes, you can then add the batteries back
- Once the batteries are added back, click on the learn button. This should help you to reset your doorbell
- Unplug the doorbell from the socket and plug it back.
- Press the doorbell to see if it rings, if it rings, you have successfully changed the frequency.
- Moisture or Lack of Cleaning
While this is a relatively easy task, you have to be careful so you do not spoil the components in the process of cleaning the doorbell. Below are steps you can use to clean the doorbell
- Carefully unscrew your doorbell with a screwdriver.
- Once this is done, use the screwdriver to open up your doorbell.
- Once the doorbell has been opened, use wool dipped in a little bit of alcohol to clean the components inside your doorbell. Be careful so you do not remove or destroy any of the components.
- After cleaning, you can then put your doorbell back together and screw it back to your wall or door.
- Improper Installation and Aged Device
It is a little more complicated if there is an improper installation. This is because you are not particularly sure if the fault is coming from bad wiring or components.
It is best to call an expert if you are looking for a fix for improper installation of your doorbell
Also, if your doorbell is aged, you should get a new one instead of trying to change the components. It is much more profitable for you to just change the doorbell than change the parts.
How To Fix A Ring Doorbell That Keeps Going off?
If you notice that your ring doorbell keeps ringing, it could be because of several reasons. Below are ways to fix your ring doorbell problem.
- Voltage and Transformer
This is the first thing you can do to fix your doorbell if you notice that your ring doorbell keeps ringing. You have to check the voltage and the transformer to know if the power it is transmitting is the requirement needed.
If the voltage is lower than the requirement, then you have found the cause of your ring doorbell ringing. Simply change the voltage and you are good to go.
Also, if the voltage is higher than 5v, it just might destroy your doorbell. Make sure to ensure the voltage in your doorbell doesn’t exceed 2v to 5v.
- Reset Your Doorbell
This is one of the quickest ways you can fix your ring doorbell if you notice that it keeps going off. Sometimes, all you need to do is reset the doorbell and your ringing problem should stop immediately.
There are different ways you can reset your ring doorbell as it all depends on the model you use. Some reset button is at the back while others are at the side.
Press the reset button for at least 15 seconds to reset the device. Once you reset it, you will have to connect the device to your app to configure it.
- Check Your Frequency
This is another method you can use to fix your ring doorbell problem. Sometimes, you might need to check and change your frequency if you notice that there is another device that is using the same frequency.
Ring doorbells use a frequency between 908 Mhz to 916mhz. Any device working on the same frequency around you will mesh up the connection which will lead to your doorbell ringing continuously whenever the device is working.
Video Guide
Conclusion
There are different reasons why your doorbell keeps going off by itself. Once you discover the reason, there are a lot of simple steps and methods you can use to fix ad get your doorbell working perfectly again.
Also, there are different ways you can use to fix your ring doorbell if you notice that your ring doorbell keeps ringing continuously.
All the methods you can use have been discussed in this article. Simply read through the article and you will get all the answers you need to your doorbell problems.
Source